Solar Street Lamp Radar Induction
Power: 300W
Solar Panel: Mono 5V 40W
Battery: Lithium iron phosphate battery 3.2V 35000mah
LED Source: SMD3030 306PCS
Material: Die-cast Aluminum
Charging Time: 5-7 hours
Working Time:12-14 hours per night
Backup time: 3-5 rainy days
Control mode: Lighting control+Remote control+Radar sensor
Time control(first 3 hours 100%,middle 4 hours 75%,last 5 hours 50%) + Light control(when day dark, auto turn on.when daytime,auto turn off)
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Solar Street Lamp Radar Induction
Aluminum Outdoor 300W Solar Street Light uses solar energy to store electricity in lithium batteries during the day and supplies electricity from the lithium batteries to LED lights at night. Built-in day and night automatic switching controller and sensitive motion sensor, if a person or car enters the control area, it will automatically adjust the brightness output of the solar street light.
At the same time, this lamp is available in a variety of wattages. You can choose the appropriate wattage according to the size of the site you are using. If you have other special needs, you can also contact us.
Specification
Power |
300W |
400W |
500W |
Solar Panel |
Mono 5V 40W |
Mono 5V 45W |
Mono 5V 50W |
Battery |
LiFePO 3.2V 35000mah |
LiFePO 3.2V 40000mah |
LiFePO 3.2V 50000mah |
LED Source |
SMD3030 306PCS |
SMD3030 408PCS |
SMD3030 510pCS |
Material |
Die-cast Aluminum |
||
Charging Time |
5-7 hours |
||
Working Time |
12-14 hours per night |
||
Backup time |
3-5 rainy days |
||
Control mode |
Lighting control+Remote control+Radar sensor |
||
Waterproof Grade |
IP65 |
||
Warranty |
3 years |
||
MOQ |
1pc |
Features
1. Lighting mode: Light control + remote control + radar induction
During the day, it can automatically recognize charging, and at night, it can recognize lights automatically. It only needs to be operated once, and then it will automatically cycle every day
①Light control and time control, when it's in dark, the solar lights can be bright automatically; first 4 hours-100% brightness; 3 hours-75% brightness; 2 hours- 40% brightness; last 4 hours-25% brightness
②Light control and motion sensor, when it's dark, the solar lights can be bright automatically; when there is someone- 100% brightness, when nobody- 50% or 30% brightness
2. High color display LED patch lamp bead
CA≥80, good color rendering, uniform light transmission, no strobe, light source coverage area is large.
3. Die-cast aluminum housing, fast heat dissipation
The integral shell has a good compression coefficient, and the surface is polished by a multi-channel baking process. It can dissipate quickly through high temperatures.
|
|
|
|
4. Normal operation in rain
Not afraid of bad weather, waterproof and rust proof, to meet the needs of outdoor lighting, 365 days of continuous battery life, fully enclosed lamp body
5. Two kinds of installation methods: pole mounting + wall mounting
Pole mounting: with gasket pick arm, suitable for installation on a cylinder and other small diameter body; Wall mounting: It is installed on the wall with a flat arm, suitable for installation on the flat building of wall light
Application place for Aluminum outdoor 300W solar street light :
Application:
- Bridges main roads, Rural road, construction;
- New rural roads, new rural courtyards,
- tourist attractions, parks, squares, private gardens, residential areas,
- urban slow lanes, narrow lanes, courtyard corridors, and other public places;
- Real estate community resort hotels government agencies and other green gardens.
Installation
Packing and Shipping


Package for Aluminum outdoor 300W solar street light:
- Screws, bracket connecting piece, hoop sheet, support rod accessories for aluminum outdoor 300W solar street light.
- Sleeve dimension φ102*3mm can be customized with stainless steel material bolts for solar light.
- Strongbox or flight case optional,
- Plywood pallet packaging for LCL,
- Carton and bubble wrap packaging for FLC.
- Samples: 5-7 days, Bulk order: about 2 weeks.
Why choose Yahua outdoor LED lighting products?
Since its establishment, Yahua Lighting has been focusing on the production and development of LED solar streetlights. We have a complete and scientific quality management system. Yahua is a collection of research and development, production and processing, and sales as one of the LED lighting manufacturers. Our products are sold in Europe and the United States, the Middle East, Africa, Southeast Asia, and other parts of the world. Pre-sales and after-sales service one-to-one, we have been adhering to the customer-first, integrity-based principle, to provide customers with quality assurance products and better service!
FAQs
Q1: What are the functions of this light?
A: The most important function of this lamp is the light control, remote control, and radar induction. It can automatically adjust the charging, lighting time, and brightness without an electric charge.
Q2: What are your strengths?
A: We have more than 20 years of experience in the lighting industry, excellent product quality, and a complete service system.
Hot Tags: Solar Street Lamp Radar Induction China, factory, manufacturers, supplier, wholesale, design, contractors, cost, price, project, for sale, outdoor solar led lights design, solar outdoor lighting design, solar power street lights design, solar led street light for garden, solar lights for garden, all in one solar led lamp