all in one integrated solar street light

Yahua lighting is a leading company in manufacturing solar LED Street Lights products for 10 years. The design of the integrated solar street light absorbs the inspiration and energy from sunlight and combines today's best green portfolio. Our responsibility is to protect the environment by saving energy and to be a low-carbon pioneer.

Components of the autonomous solar Led luminaire

- Monocrystalline panel support

Support is made of hot-dip galvanized steel, according to the UNE 37.501-71 standard, to prevent deterioration by atmospheric agents and is calculated to withstand wind loads.

-Luminary

The regulation and control system, which is attached to the luminaire or in a hermetic box guarantees its operation in humid and/or corrosive environments. This control has been specially designed for the management of autonomous luminaires in photovoltaic installations.

* The Charge cycle has four stages: deep charge, equalization, absorption, and float; in this way, the longest useful life of the batteries is guaranteed.

* Twilight switch that allows you to time the lamp on and off at dusk and before dawn (integrated).

* Have Test functions that facilitate maintenance operations.

* 80W lamp, luminous flux performance 160 lm/w.

- Photovoltaic modules:

The photovoltaic modules to be used have a total power of 100WATS, 18 V, and are manufactured with the highest quality materials to ensure long life and system reliability.

- Accumulator battery:

Its voltage will be 12.8 V, and its capacity is based on previous technical calculations (1-panel size, autonomy, peak sun hours, power-on hours, etc.); The battery compartment of the staff has the capacity to hold 1 battery (54AH).

Waterproof rate: IP65

Luminous Flux: 12000 LM

Color temperature: 5000k,6000K

Install height: 22.9ft-29.5ft(8-9meters)

Maximum sensing distance: 39.37ft, angle: 140°

Working temperature: -20℃-60℃ (If the temperature is lower than -20, the battery will turn on self-protection and the battery can't charge.）

Package:

1x solar-led street light

10 x Screws

3 x Gasket

1 x Support Frame

1 x User Manual

Note:

Please read the instructions carefully before installation.

Please turn on the switch before installation or charging. In the dark, after turning on the switch, it will light up after 10 seconds.

Please choose a position without any shelter for enough sunshine and full exposure.

Installation tools and the pole is not included.