How to repair the Solar street lamp ?
Jan 16, 2023
The solar street lamp with solar radiation energy is charged during the daytime and will light up at night automatically. It is without complex and expensive pipeline laying, and you can adjust the layout of the lamp, which is safe, energy-saving, and pollution-free. But as solar-powered street lights are widely installed across the country, their after-sales maintenance will also increase. So how to make good use of each resource has become the most headache for people. When something goes wrong with a solar street lamp, how do we repair the street lamp?
Solar street lights as a new type of energy-saving street lamp, sometimes because of some reasons and can not shine, affect public lighting, the lamp in case of wiring error, small battery capacity battery damage, street lamp controller damage, or quality problems itself may not be bright, overhaul to step by step overhaul, respectively check the child battery, solar panel. Controller, lamp holder, etc. Solar street lights need reasonable maintenance, the following is to understand the maintenance sequence and how to maintain solar street lights when they solar street lights are not bright!

• What causes solar streetlights can not to light up?
Solar street lamps save energy, environmental protection, and cost. It is a new type of green street lamp. However, some customers also report that solar street lamps do not light up after installation. There are several possible reasons why solar streetlights don't work:
1. The wiring mode is wrong
When wiring the positive and negative terminals of the lamp holder are reversed, there will be no light now, if it has not been extinguished, it may be the pool plate is reversed.
2. The capacity is too small
According to the relevant regulations, the storage power of solar lithium batteries from the factory to transport battery is controlled at 30% left stone, if not installed for a long time or after installation in rainy weather, it will consume the stored energy, when the electricity is used up, the natural is not bright
3. Quality problem
The quality of the solar street lamp is poor, and it may also lead to not being bright, quality problems may exist in the line fault or low power generation efficiency, in this case, can contact the manufacturer to repair or let professionals on-site service.
4. The battery is damaged
If the solar battery is damaged, it will affect the performance of charging and discharging, leading to the lamp time becoming short, it is not bright and other fault phenomena.
5. Controller is damaged
The controller regulates the charging and discharging time as well as the voltage and power and other parameters. If it has been damaged, the charging and discharging will be out of control, thus unable to shine.

• What is the process to repair the Solar street lights which are not lit up?
The main component of the solar street lamp is the solar panel and lamp holder, its life is very long, in the absence of the installation position, if the lamp is not bright, generally in accordance with the following four points to detect. Check the battery, you can remove the battery and replace it with a new battery, if it is bright, it indicates that the battery is a problem, if it is not bright, continue to check whether the panel connection is connected, if there is no problem with the panel connection, then please check its controller and replace the matching model, if the controller is not abnormal, see whether there is a problem with the lamp cap, In the lamp holder without any fault problem, that is the quality of the product itself, you can contact the manufacturer after the sale.
• How to maintain solar photovoltaic street lamps?
1. In case of strong wind, heavy rain, ice power, snow, and other conditions, measures should be taken to protect solar cells and avoid damage.
2, the solar cell daylighting surface should always be kept clean, such as dust or other dirt, should be washed with water first, and then dry gently with clean gauze, do not use hard objects or corrosive solvents to wash.
3. The battery bank matching with the solar cell array should be used in strict accordance with the use and maintenance method of the battery.
4. Check the wiring of the solar street lamp electrical system regularly to avoid loose wiring. Do not let hard objects or sharp objects hit the solar panels, otherwise, it will damage the solar panels.
If you need high-quality solar street lights or need a very professional team to help you install or repair the street lamp, Yahua Lighting Co., Ltd is a very good choice, which relies on its own production capacity and technical strength, to create a perfect solar street lamp maintenance network system, in various provinces and cities in the country has established after-sales maintenance network. Long-term technical after-sales work, accumulated rich experience in lamp maintenance, perennial farming in the laboratory, production line, and lamp components have done more than 30,000 tests in various aspects, have a good understanding of raw materials, production, market, foreign trade, and after-sales environment.






