What should we pay attention to during the installation of solar street lamp ?

1. Comprehensively understand the characteristics of solar street lamps, light sources, and lamp poles, separate the investment budget according to the road practice and reference lighting standards, and rationally select solar lamps, light sources, and lamp poles, so as to give full play to the advantages of high efficiency and energy saving of light sources, light distribution and accessory combination of solar lamps. recommendation Technical Support After-sales protectio

2. Under the condition of guaranteed lighting performance, properly increase the spacing of solar street lamps to save the number of lamps; Improve the pole height of solar street lamp properly to improve the lighting effect; As much as possible in the middle of the road divider strip poles to save on construction costs.

3. Separate road engineering, timely and early intervention in pole position selection, foundation construction, and embedment, in order to find problems in time, reasonable changes, ensure quality, and save investment.

4. According to the practice and geological conditions of the solar street lamp project site, design and manufacture the solar street lamp pole base and high pole lamp base to ensure a solid foundation. Special attention should be paid to the compatibility between the embedded bolt and the reserved hole of the rod seat, accurate positioning, reasonable length of the embedded bolt and the remaining length, and proper maintenance of the part of the thread for lifting and positioning.

5. In the rock layer and wind fossil section, scattered grounding, and segmented grounding are difficult to reach the request. It is possible to consider the connection of galvanized flat steel and other conductors according to the design request. The high-pole lamp of solar street lamps is scattered and mainly relies on grounding. If necessary, the resistance reducer should be used to reduce the grounding resistance.

6. The lifting operation should strictly abide by the operating rules. Special attention should be paid to the power grid lines and other lines around the hoisting equipment, as well as the surrounding structures. The lifting points should be reasonable during hoisting, and timely adjustments should be made after positioning.

7. Pay attention to the beauty of the solar street lamps pole after the device. From the beginning of the base construction, the light position is controlled by the main line, and the linear change is reasonable according to the road design. The light pole is straight, the processing weld and the access port should avoid the main direction, and the whole line insists on differences. The Angle of the light pole cantilever should adhere to the harmony of direction and Angle.

8. The solar street lamps' internal accessories should be inserted tightly and firmly to prevent loose wind swings and poor contact from forming problems. Solar street lamp and lamp pole, lamp pole, and cantilever firmly fixed. Each bar of the solar street lamp should be set in place, the lifting frame and lamps should be firmly fixed, the lifting system should be safe and secure, and the lifting, limiting, positioning and other functions should be complete.